programmer xprog-m motorola 68hc05, 68hc08,68hc11,68hc(s)12

>>The XPROG-m programmer is designed to replace the earlier version of  XPROG programmer.
>>XPROG-m programmer is fully upward-compatible hardware with XPROG programmer and have many additional features.

>>The XPROG-m supports in-circuit or on-board programming of Motorola 68HC05, 68HC08, 68HC11, 68HC(S)12, HC912, MC9S12, MC9S12X, Texas Instruments TMS370, MPC5xx, ST10Fxx, ATmega family MCU's and serial EEPROM's.

>>All supported devices are divided into "Software authorization" licenses.
>>You can obtain authorization license only for these devices you are interested in.
XPROG-m Rev. E functional features :
>>Fully compatible with all software versions of " Device Programmer Desktop".
>>Software update (ATMEGA) - directly from "Device Programmer Desktop".
>>Software version control mechanism.
>>Self check for error handling.
>>Communication via  USB 1.1 / 2.0   or high speed RS232 interface .
>>Fully upward-compatible XPROG connector.
>>Multi functional XPROG-m connector.
>>8 pin DIP socket for on- board programming.
>>Supports many PLCC, QFP, LQFP adapters for on- board programming.
>>High speed hardware engine (PLD).
>>Two PWM regulated and ADC controlled voltage regulators.
>>K-Line interface pin.

Hardware Specifications :
>>Include high output current MPU.
>>External output for on-board device programming.
>>Serial port interface (up to 115K baud) works on (COM1, COM 2, COM3 or COM4).
>>USB 1.1 / 2.0

Electrical Requirements :
>>Power consumption : 300 mA.
NOTE:
>>If programmer connects to PC via RS-232 serial port, an external 12V DC power supply is needed.
>>If programmer connects to PC via USB port ,usually an external power supply is not needed, but be sure that USB can supply enough power.

System Requirements for PC :
>>Processor: INTEL Pentium 60MHz or faster (depends on operating system)
>>Memory (RAM): 32MB (depends on operating system)
>> Hard drive: 5MB free space
>>Communication: One free physical COM-port or USB  1.1 / 2.0
>>Operating system: Microsoft Windows 95/ 98/ NT/ ME/ 2000/ XP
 NOTE: USB is not supported on Windows NT 4.0 or early versions of Windows 98

Package including:
>>Device programmer desktop 1pc
>>USB cable 1 pc 
>>Programming adapters 11pcs
>>Plastic suitcase 1 pc
>>Carton box 1 pc
>>Installation CD

• Mechanic Tool